Pumpkin - Notes on handling the Perl Patch Pumpkin


There is no simple synopsis, yet.


This document attempts to begin to describe some of the considerations involved in patching and maintaining perl.

This document is still under construction, and still subject to significant changes. Still, I hope parts of it will be useful, so I'm releasing it even though it's not done.

For the most part, it's a collection of anecdotal information that already assumes some familiarity with the Perl sources. I really need an introductory section that describes the organization of the sources and all the various auxiliary files that are part of the distribution.

Where Do I Get Perl Sources and Related Material?

The Comprehensive Perl Archive Network (or CPAN) is the place to go. There are many mirrors, but the easiest thing to use is probably, which automatically points you to a mirror site ``close'' to you.

Perl5-porters mailing list

The mailing list is the main group working with the development of perl. If you're interested in all the latest developments, you should definitely subscribe. The list is high volume, but generally has a fairly low noise level.

Subscribe by sending the message (in the body of your letter)

	subscribe perl5-porters

to .

How are Perl Releases Numbered?

Perl version numbers are floating point numbers, such as 5.003. The major version number is 5, and the '003' is the patchlevel. The version number is available as the magic variable $], and can be used in comparisons, e.g.

	print "You've got an old perl\n" if $] < 5.002;

(Observations about the imprecision of floating point numbers for representing reality probably have more relevance than you might imagine :-)

You can also require particular version (or later) with

	use 5.002;


In addition, there may be ``developer'' sub-versions available. These are not official releases. They may contain unstable experimental features, and are subject to rapid change. Such developer sub-versions are numbered with sub-version numbers. For example, version 5.003_04 is the 4'th developer version built on top of 5.003. It might include the _01, _02, and _03 changes, but it also might not. Sub-versions are allowed to be subversive.

These sub-versions can also be used as floating point numbers, so you can do things such as

	print "You've got an unstable perl\n" if $] == 5.00303;

You can also require particular version (or later) with

	use 5.00303;

The sub-versions are usually available on CPAN in the src/5.0/unsupported directory.

Why such a complicated scheme?

Two reasons, really. At least.

First, we need some way to identify releases that are known to have new features that need testing and exploration. The subversion scheme does that nicely while fitting into the use 5.003; mold.

Second, since most of the folks who help maintain perl do so on a free-time voluntary basis, perl development does not proceed at a precise pace, though it always seems to be moving ahead quickly. We needed some way to pass around the ``patch pumpkin'' to allow different people chances to work on different aspects of the distribution without getting in each other's way. It wouldn't be constructive to have multiple people working on incompatible implementations of the same idea. Instead what was needed was some kind of ``baton'' or ``token'' to pass around so everyone knew whose turn was next.

Why is it called the patch pumpkin?

Chip Salzenberg gets credit for that. We had passed around various names (baton, token, hot potato) but none caught on. Then, Chip asked:

[begin quote]

   Who has the patch pumpkin?

To explain: A former co-worker told me once that at a previous job, there was one tape drive and multiple systems that used it for backups. But instead of some high-tech exclusion software, they used a low-tech method to prevent multiple simultaneous backups: a stuffed pumpkin. No one was allowed to make backups unless they had the ``backup pumpkin''.

[end quote]

The name has stuck.

Philosophical Issues in Patching Perl

There are no absolute rules, but there are some general guidelines I have tried to follow as I apply patches to the perl sources. (This section is still under construction.)

Solve problems as generally as possible

(I still have to think of a good example here.)

Seek consensus on major changes

If you are making big changes, don't do it in secret. Discuss the ideas in advance on perl5-porters.

Keep the documentation up-to-date.

If your changes may affect how users use perl, then check to be sure that the documentation is in sync with your changes. Be sure to check all the files pod/*.pod and also the INSTALL document.

Consider writing the appropriate documentation first and then implementing it to correspond to the documentation.

Avoid machine-specific #ifdef's.

To the extent reasonable, try to avoid machine-specific #ifdef's in the sources. Instead, use feature-specific #ifdef's. The reason is that the machine-specific #ifdef's may not be valid across major releases of the operating system. Further, the feature-specific tests may help out folks on another platform who have the same problem.

Allow for lots of testing.

We should never release a main version without testing it as a subversion first.

Automatically-generated Files

The embed.h , keywords.h , and opcode.h files are all automatically generated by perl scripts. In general, don't patch these directly; patch the data files instead.

Configure and config_h.SH are also automatically generated by metaconfig . In general, you should patch the metaconfig units instead of patching these files directly.

How to Make a Distribution

There really ought to be a 'make dist' target, but there isn't. The 'dist' suite of tools also contains a number of tools that I haven't learned how to use yet. Some of them may make this all a bit easier.

Here are the steps I go through to prepare a patch & distribution.

Lots of it could doubtless be automated but isn't.

Announce your intentions

First, you should volunteer out loud to take the patch pumpkin. It's generally counter-productive to have multiple people working in secret on the same thing.

At the same time, announce what you plan to do with the patch pumpkin, to allow folks a chance to object or suggest alternatives, or do it for you. Naturally, the patch pumpkin holder ought to incorporate various bug fixes and documentation improvements that are posted while he or she has the pumpkin, but there might also be larger issues at stake.

One of the precepts of the subversion idea is that we shouldn't give it to anyone unless we have some idea what you're going to do with it.

update patchlevel.h

Don't be shy about using the subversion number, even for a relatively modest patch. We've never even come close to using all 99 subversions, and it's better to have a distinctive number for your patch. If you need feedback on your patch, go ahead and issue it and promise to incorporate that feedback quickly (e.g. within 1 week) and send out a second patch.

run metaconfig

If you need to make changes to Configure or config_h.SH, it may be best to change the appropriate metaconfig units instead, and regenerate Configure.

	metaconfig -m

will regenerate Configure and config_h.SH. More information on obtaining and running metaconfig is in the U/README file that comes with Perl's metaconfig units. Perl's metaconfig units should be available the same place you found this file. On CPAN, look under my directory id/ANDYD/ for a file such as 5.003_07-02.U.tar.gz . That file should be unpacked in your main perl source directory. It contains the files needed to run metaconfig to reproduce Perl's Configure script.

Alternatively, do consider if the *ish.h files might be a better place for your changes.


Make sure the MANIFEST is up-to-date. You can use dist's manicheck program for this. You can also use

    perl -MExtUtils::Manifest -e fullcheck

to do half the job. This will make sure everything listed in MANIFEST is included in the distribution. dist's manicheck command will also list extra files in the directory that are not listed in MANIFEST.

The MANIFEST is normally sorted, with one exception. Perl includes both a Configure script and a configure script. The configure script is a front-end to the main Configure , but is there to aid folks who use autoconf-generated configure files for other software. The problem is that Configure and configure are the same on case-insensitive file systems, so I deliberately put configure first in the MANIFEST so that the extraction of Configure will overwrite configure and leave you with the correct script. (The configure script must also have write permission for this to work, so it's the only file in the distribution I normally have with write permission.)

If you are using metaconfig to regenerate Configure, then you should note that metaconfig actually uses, so you want to be sure is up-to-date too. I haven't found the MANIFEST/ distinction particularly useful, but that's probably because I still haven't learned how to use the full suite of tools in the dist distribution.

Check permissions

All the tests in the t/ directory ought to be executable. The main makefile used to do a 'chmod t/*/*.t', but that resulted in a self-modifying distribution--something some users would strongly prefer to avoid. Probably, the t/TEST script should check for this and do the chmod if needed, but it doesn't currently.

In all, the following files should probably be executable:


Other things ought to be readable, at least :-).

Probably, the permissions for the files could be encoded in MANIFEST somehow, but I'm reluctant to change MANIFEST itself because that could break old scripts that use MANIFEST.

I seem to recall that some SVR3 systems kept some sort of file that listed permissions for system files; something like that might be appropriate.

Run Configure

This will build a and config.h. You can skip this if you haven't changed Configure or config_h.SH at all.

Update config_H

The config_H file is provided to help those folks who can't run Configure. It is important to keep it up-to-date. If you have changed config_h.SH, those changes must be reflected in config_H as well. (The name config_H was chosen to distinguish the file from config.h even on case-insensitive file systems.) Simply edit the existing config_H file; keep the first few explanatory lines and then copy your new config.h below.

It may also be necessary to update vms/config.vms and plan9/config.plan9, though you should be quite careful in doing so if you are not familiar with those systems. You might want to issue your patch with a promise to quickly issue a follow-up that handles those directories.

make run_byacc

If you have byacc-1.8.2 (available from CPAN), and if there have been changes to perly.y , you can regenerate the perly.c file. The run_byacc makefile target does this by running byacc and then applying some patches so that byacc dynamically allocates space, rather than having fixed limits. This patch is handled by the perly.fixer script. Depending on the nature of the changes to perly.y , you may or may not have to hand-edit the patch to apply correctly. If you do, you should include the edited patch in the new distribution. If you have byacc-1.9, the patch won't apply cleanly. Changes to the printf output statements mean the patch won't apply cleanly. Long ago I started to fix perly.fixer to detect this, but I never completed the task.

Some additional notes from Larry on this:

Don't forget to regenerate perly.c.diff.

    diff -c perly.c.orig perly.c >perly.c.diff

It may be necessary to edit perly.c first if the previous attempt to patch didn't successfully remove the chunk of lines starting with

    #line 29 "perly.y"

and ending one line before

    #define YYERRCODE 256

This only happens when you add or remove a token type, causing that hunk of the patch to fail. I suppose this could be automated, but it doesn't happen very often nowadays.


make regen_headers

The embed.h , keywords.h , and opcode.h files are all automatically generated by perl scripts. Since the user isn't guaranteed to have a working perl, we can't require the user to generate them. Hence you have to, if you're making a distribution.

I used to include rules like the following in the makefile:

    # The following three header files are generated automatically
    # The correct versions should be already supplied with the perl kit,
    # in case you don't have perl or 'sh' available.
    # The - is to ignore error return codes in case you have the source
    # installed read-only or you don't have perl yet.
	    @echo "Don't worry if this fails."
	    - perl

However, I got lots of mail consisting of people worrying because the command failed. I eventually decided that I would save myself time and effort by manually running make regen_headers myself rather than answering all the questions and complaints about the failing command.

global.sym and interp.sym

Make sure these files are up-to-date. Read the comments in these files and in perl_exp.SH to see what to do.

Binary compatibility

If you do change global.sym or interp.sym , think carefully about what you are doing. To the extent reasonable, we'd like to maintain souce and binary compatibility with older releases of perl. That way, extensions built under one version of perl will continue to work with new versions of perl.

Of course, some incompatible changes may well be necessary. I'm just suggesting that we not make any such changes without thinking carefully about them first. If possible, we should provide backwards-compatibility stubs. There's a lot of XS code out there. Let's not force people to keep changing it.


You may well have to rebuild pod/perltoc.pod . Check out the script pod/buildtoc . It might need updating, but it's a good place to start.


Be sure to update the Changes file. Try to include both an overall summary as well as detailed descriptions of the changes. There are differing opinions on whether the detailed descriptions ought to go in the Changes file or whether they ought to be available separately in the patch file (or both). There is no disagreement that detailed descriptions ought to be easily available somewhere.

Making the new distribution

Suppose, for example, that you want to make version 5.003_08. Then you can do something like the following

	mkdir ../perl5.003_08
	awk '{print $1}' MANIFEST | cpio -pdm ../perl5.003_08
	cd ../
	tar cf perl5.003_08.tar perl5.003_08
	gzip --best perl5.003_08.tar

Making a new patch

I find the makepatch utility quite handy for making patches. You can obtain it from any CPAN archive under The only difference between my version and the standard one is that I have mine do a

	# Print a reassuring "End of Patch" note so people won't
	# wonder if their mailer truncated patches.
	print "\n\nEnd of Patch.\n";

at the end. That's because I used to get questions from people asking if their mail was truncated.

Here's how I generate a new patch. I'll use the hypothetical 5.003_07 to 5.003_08 patch as an example.

	# unpack perl5.003_07/
	gzip -d -c perl5.003_07.tar.gz | tar -xof -
	# unpack perl5.003_08/
	gzip -d -c perl5.003_08.tar.gz | tar -xof -
	makepatch perl5.003_07 perl5.003_08 > perl5.003_08.pat

Makepatch will automatically generate appropriate rm commands to remove deleted files. Unfortunately, it will not correctly set permissions for newly created files, so you may have to do so manually. For example, patch 5.003_04 created a new test t/op/gv.t which needs to be executable, so at the top of the patch, I inserted the following lines:

	# Make a new test
	touch t/op/gv.t
	chmod +x t/opt/gv.t

Now, of course, my patch is now wrong because makepatch didn't know I was going to do that command, and it patched against /dev/null.

So, what I do is sort out all such shell commands that need to be in the patch (including possible mv-ing of files, if needed) and put that in the shell commands at the top of the patch. Next, I delete all the patch parts of perl5.003_08.pat, leaving just the shell commands. Then, I do the following:

	cd perl5.003_07
	sh ../perl5.003_08.pat
	cd ..
	makepatch perl5.003_07 perl5.003_08 >> perl5.003_08.pat

(Note the append to preserve my shell commands.) Now, my patch will line up with what the end users are going to do.

Testing your patch

It seems obvious, but be sure to test your patch. That is, verify that it produces exactly the same thing as your full distribution.

	rm -rf perl5.003_07
	gzip -d -c perl5.003_07.tar.gz | tar -xf -
	cd perl5.003_07
	sh ../perl5.003_08.pat
	patch -p1 -N < ../perl5.003_08.pat
	cd ..
	gdiff -r perl5.003_07 perl5.003_08

where gdiff is GNU diff. Other diff's may also do recursive checking.

More testing

Again, it's obvious, but you should test your new version as widely as you can. You can be sure you'll hear about it quickly if your version doesn't work on both ANSI and pre-ANSI compilers, and on common systems such as SunOS 4.1.[34], Solaris, and Linux.

If your changes include conditional code, try to test the different branches as thoroughly as you can. For example, if your system supports dynamic loading, you can also test static loading with

	sh Configure -Uusedl

You can also hand-tweak your config.h to try out different #ifdef branches.

Common Gotcha's

The '#elif' preprocessor directive is not understood on all systems. Specifically, I know that Pyramids don't understand it. Thus instead of the simple

	#if defined(I_FOO)
	#  include <foo.h>
	#elif defined(I_BAR)
	#  include <bar.h>
	#  include <fubar.h>

You have to do the more Byzantine

	#if defined(I_FOO)
	#  include <foo.h>
	#  if defined(I_BAR)
	#    include <bar.h>
	#  else
	#    include <fubar.h>
	#  endif

Incidentally, whitespace between the leading '#' and the preprocessor command is not guaranteed, but is very portable and you may use it freely. I think it makes things a bit more readable, especially once things get rather deeply nested. I also think that things should almost never get too deeply nested, so it ought to be a moot point :-)

Probably Prefer POSIX
It's often the case that you'll need to choose whether to do something the BSD-ish way or the POSIX-ish way. It's usually not a big problem when the two systems use different names for similar functions, such as memcmp() and bcmp(). The perl.h header file handles these by appropriate #defines, selecting the POSIX mem*() functions if available, but falling back on the b*() functions, if need be.

More serious is the case where some brilliant person decided to use the same function name but give it a different meaning or calling sequence :-). getpgrp() and setpgrp() come to mind. These are a real problem on systems that aim for conformance to one standard (e.g. POSIX), but still try to support the other way of doing things (e.g. BSD). My general advice (still not really implemented in the source) is to do something like the following. Suppose there are two alternative versions, fooPOSIX() and fooBSD().

    #ifdef HAS_FOOPOSIX
	/* use fooPOSIX(); */
    #  ifdef HAS_FOOBSD
	/* try to emulate fooPOSIX() with fooBSD();
	   perhaps with the following:  */
    #    define fooPOSIX fooBSD
    #  else
    #  /* Uh, oh.  We have to supply our own. */
    #    define fooPOSIX Perl_fooPOSIX
    #  endif

Think positively
If you need to add an #ifdef test, it is usually easier to follow if you think positively, e.g.

	    /* use neato feature */
	    /* use some fallback mechanism */

rather than the more impenetrable

	    /* Not missing it, so we must have it, so use it */
	    /* Are missing it, so fall back on something else. */

Of course for this toy example, there's not much difference. But when the #ifdef's start spanning a couple of screen fulls, and the #else's are marked something like


I find it easy to get lost.

Providing Missing Functions -- Problem
Not all systems have all the neat functions you might want or need, so you might decide to be helpful and provide an emulation. This is sound in theory and very kind of you, but please be careful about what you name the function. Let me use the pause() function as an illustration.

Perl5.003 has the following in perl.h

    #ifndef HAS_PAUSE
    #define pause() sleep((32767<<16)+32767)

Configure sets HAS_PAUSE if the system has the pause() function, so this #define only kicks in if the pause() function is missing. Nice idea, right?

Unfortunately, some systems apparently have a prototype for pause() in unistd.h , but don't actually have the function in the library. (Or maybe they do have it in a library we're not using.)

Thus, the compiler sees something like

    extern int pause(void);
    /* . . . */
    #define pause() sleep((32767<<16)+32767)

and dies with an error message. (Some compilers don't mind this; others apparently do.)

To work around this, 5.003_03 and later have the following in perl.h:

    /* Some unistd.h's give a prototype for pause() even though
       HAS_PAUSE ends up undefined.  This causes the #define
       below to be rejected by the compiler.  Sigh.
    #ifdef HAS_PAUSE
    #  define Pause	pause
    #  define Pause() sleep((32767<<16)+32767)

This works.

The curious reader may wonder why I didn't do the following in util.c instead:

    #ifndef HAS_PAUSE
    void pause()

That is, since the function is missing, just provide it. Then things would probably be been alright, it would seem.

Well, almost. It could be made to work. The problem arises from the conflicting needs of dynamic loading and namespace protection.

For dynamic loading to work on AIX (and VMS) we need to provide a list of symbols to be exported. This is done by the script perl_exp.SH , which reads global.sym and interp.sym . Thus, the pause symbol would have to be added to global.sym So far, so good.

On the other hand, one of the goals of Perl5 is to make it easy to either extend or embed perl and link it with other libraries. This means we have to be careful to keep the visible namespace ``clean''. That is, we don't want perl's global variables to conflict with those in the other application library. Although this work is still in progress, the way it is currently done is via the embed.h file. This file is built from the global.sym and interp.sym files, since those files already list the globally visible symbols. If we had added pause to global.sym, then embed.h would contain the line

    #define pause	Perl_pause

and calls to pause in the perl sources would now point to Perl_pause. Now, when ld is run to build the perl executable, it will go looking for perl_pause, which probably won't exist in any of the standard libraries. Thus the build of perl will fail.

Those systems where HAS_PAUSE is not defined would be ok, however, since they would get a Perl_pause function in util.c. The rest of the world would be in trouble.

And yes, this scenario has happened. On SCO, the function chsize is available. (I think it's in -lx , the Xenix compatibility library.) Since the perl4 days (and possibly before), Perl has included a chsize function that gets called something akin to

    #ifndef HAS_CHSIZE
    I32 chsize(fd, length)
    /*  . . . */

When 5.003 added

    #define chsize	Perl_chsize

to embed.h , the compile started failing on SCO systems.

The ``fix'' is to give the function a different name. The one implemented in 5.003_05 isn't optimal, but here's what was done:

    #ifdef HAS_CHSIZE
    # ifdef my_chsize  /* Probably #defined to Perl_my_chsize in embed.h */
    #   undef my_chsize
    # endif
    # define my_chsize chsize

My explanatory comment in patch 5.003_05 said:

     Undef and then re-define my_chsize from Perl_my_chsize to
     just plain chsize if this system HAS_CHSIZE.  This probably only
     applies to SCO.  This shows the perils of having internal
     functions with the same name as external library functions :-).

Now, we can safely put my_chsize in global.sym , export it, and hide it with embed.h .

To be consistent with what I did for pause, I probably should have called the new function Chsize, rather than my_chsize. However, the perl sources are quite inconsistent on this (Consider New, Mymalloc, and Myremalloc, to name just a few.)

There is a problem with this fix, however, in that Perl_chsize was available as a libperl.a library function in 5.003, but it isn't available any more (as of 5.003_07). This means that we've broken binary compatibility. This is not good.

Providing Missing Functions -- Some ideas.
We currently don't have a standard way of handling such missing function names. Right now, I'm effectively thinking aloud about a solution. Some day, I'll try to formally propose a solution.

Part of the problem is that we want to have some functions listed as exported but not have their names mangled by embed.h or possibly conflict with names in standard system headers. We actually already have such a list at the end of perl_exp.SH (though that list is out-of-date):

    # extra globals not included above.
    cat <<END >> perl.exp

This still needs much thought, but I'm inclined to think that one possible solution is to prefix all such functions with perl_ in the source and list them along with the other perl_* functions in perl_exp.SH .

Thus, for chsize, we'd do something like the following:

    /* in perl.h */
    #ifdef HAS_CHSIZE
    #  define perl_chsize chsize

then in some file (e.g. util.c or doio.c ) do

    #ifndef HAS_CHSIZE
    I32 perl_chsize(fd, length)
    /* implement the function here . . . */

Alternatively, we could just always use chsize everywhere and move chsize from global.sym to the end of perl_exp.SH . That would probably be fine as long as our chsize function agreed with all the chsize function prototypes in the various systems we'll be using. As long as the prototypes in actual use don't vary that much, this is probably a good alternative. (As a counter-example, note how Configure and perl have to go through hoops to find and use get Malloc_t and Free_t for malloc and free.)

At the moment, this latter option is what I tend to prefer.

All the world's a VAX
Sorry, showing my age:-). Still, all the world is not BSD 4.[34], SVR4, or POSIX. Be aware that SVR3-derived systems are still quite common (do you have any idea how many systems run SCO?) If you don't have a bunch of v7 manuals handy, the metaconfig units (by default installed in /usr/local/lib/dist/U ) are a good resource to look at for portability.

Miscellaneous Topics


Why does perl use a metaconfig-generated Configure script instead of an autoconf-generated configure script?

Metaconfig and autoconf are two tools with very similar purposes. Metaconfig is actually the older of the two, and was originally written by Larry Wall, while autoconf is probably now used in a wider variety of packages. The autoconf info file discusses the history of autoconf and how it came to be. The curious reader is referred there for further information.

Overall, both tools are quite good, I think, and the choice of which one to use could be argued either way. In March, 1994, when I was just starting to work on Configure support for Perl5, I considered both autoconf and metaconfig, and eventually decided to use metaconfig for the following reasons:

Compatibility with Perl4
Perl4 used metaconfig, so many of the #ifdef's were already set up for metaconfig. Of course metaconfig had evolved some since Perl4's days, but not so much that it posed any serious problems.

Metaconfig worked for me
My system at the time was Interactive 2.2, a SVR3.2/386 derivative that also had some POSIX support. Metaconfig-generated Configure scripts worked fine for me on that system. On the other hand, autoconf-generated scripts usually didn't. (They did come quite close, though, in some cases.) At the time, I actually fetched a large number of GNU packages and checked. Not a single one configured and compiled correctly out-of-the-box with the system's cc compiler.

Configure can be interactive.
With both autoconf and metaconfig, if the script works, everything is fine. However, one of my main problems with autoconf-generated scripts was that if it guessed wrong about something, it could be very hard to go back and fix it. For example, autoconf always insisted on passing the -Xp flag to cc (to turn on POSIX behavior), even when that wasn't what I wanted or needed for that package. There was no way short of editing the configure script to turn this off. You couldn't just edit the resulting Makefile at the end because the -Xp flag influenced a number of other configure tests.

Metaconfig's Configure scripts, on the other hand, can be interactive. Thus if Configure is guessing things incorrectly, you can go back and fix them. This isn't as important now as it was when we were actively developing Configure support for new features such as dynamic loading, but it's still useful occasionally.

At the time, autoconf-generated scripts were covered under the GNU Public License, and hence weren't suitable for inclusion with Perl, which has a different licensing policy. (Autoconf's licensing has since changed.)

Metaconfig builds up Configure from a collection of discrete pieces called ``units''. You can override the standard behavior by supplying your own unit. With autoconf, you have to patch the standard files instead. I find the metaconfig ``unit'' method easier to work with. Others may find metaconfig's units clumsy to work with.

@INC search order

By default, the list of perl library directories in @INC is the following:


Specifically, on my Solaris/x86 system, I run sh Configure -Dprefix=/opt/perl and I have the following directories:


That is, perl's directories come first, followed by the site-specific directories.

The site libraries come second to support the usage of extensions across perl versions. Read the relevant section in INSTALL for more information. If we ever make $sitearch version-specific, this topic could be revisited.

Why isn't there a directory to override Perl's library?

Mainly because no one's gotten around to making one. Note that ``making one'' involves changing perl.c, Configure, config_h.SH (and associated files, see above), and documenting it all in the INSTALL file.

Apparently, most folks who want to override one of the standard library files simply do it by overwriting the standard library files.


In the perl.c sources, you'll find an undocumented APPLLIB_EXP variable, sort of like PRIVLIB_EXP and ARCHLIB_EXP (which are documented in config_h.SH). Here's what APPLLIB_EXP is for, from a mail message from Larry:

    The main intent of APPLLIB_EXP is for folks who want to send out a
    version of Perl embedded in their product.  They would set the symbol
    to be the name of the library containing the files needed to run or to
    support their particular application.  This works at the "override"
    level to make sure they get their own versions of any library code that
    they absolutely must have configuration control over.

    As such, I don't see any conflict with a sysadmin using it for a
    override-ish sort of thing, when installing a generic Perl.  It should
    probably have been named something to do with overriding though.  Since
    it's undocumented we could still change it...  :-)

Given that it's already there, you can use it to override distribution modules. If you do

	sh Configure -Dccflags='-DAPPLLIB_EXP=/my/override'

then perl.c will put /my/override ahead of ARCHLIB and PRIVLIB.

Upload Your Work to CPAN

You can upload your work to CPAN if you have a CPAN id. Check out for information on _PAUSE_, the Perl Author's Upload Server.

I typically upload both the patch file, e.g. perl5.003_08.pat.gz and the full tar file, e.g. perl5.003_08.tar.gz .

If you want your patch to appear in the src/5.0/unsupported directory on CPAN, send e-mail to the CPAN master librarian. (Check out

Help Save the World

You should definitely announce your patch on the perl5-porters list. You should also consider announcing your patch on comp.lang.perl.announce, though you should make it quite clear that a subversion is not a production release, and be prepared to deal with people who will not read your disclaimer.


Here, in no particular order, are some Configure and build-related items that merit consideration. This list isn't exhaustive, it's just what I came up with off the top of my head.

Good ideas waiting for round tuits

I think we ought to support

    Configure -Dinstallprefix=/blah/blah

Currently, we support -Dprefix=/blah/blah , but the changing the install location has to be handled by something like the config.over trick described in INSTALL . AFS users also are treated specially. We should probably duplicate the metaconfig prefix stuff for an install prefix.

Configure -Dsrcdir=/blah/blah
We should be able to emulate configure --srcdir . Tom Tromey has submitted some patches to the dist-users mailing list along these lines. Eventually, they ought to get folded back into the main distribution.

Hint file fixes
Various hint files work around Configure problems. We ought to fix Configure so that most of them aren't needed.

Hint file information
Some of the hint file information (particularly dynamic loading stuff) ought to be fed back into the main metaconfig distribution.

Probably good ideas waiting for round tuits

GNU configure --options
I've received sensible suggestions for --exec_prefix and other GNU configure --options. It's not always obvious exactly what is intended, but this merits investigation.

make clean
Currently, make clean isn't all that useful, though make realclean and make distclean are. This needs a bit of thought and documentation before it gets cleaned up.

Try gcc if cc fails.
Currently, we just give up.

bypassing safe*alloc wrappers
On some systems, it may be safe to call the system malloc directly without going through the util.c safe* layers. (Such systems would accept free(0), for example.) This might be a time-saver for systems that already have a good malloc. (Recent Linux libc's apparently have a nice malloc that is well-tuned for the system.)

Vague possibilities

Win95, WinNT, and Win32 support
We need to get something into the distribution for 32-bit Windows. I'm tired of all the private e-mail questions I get, and I'm saddened that so many folks keep trying to reinvent the same wheel.

Get some of the Macintosh stuff folded back into the main distribution.

gconvert replacement
Maybe include a replacement function that doesn't lose data in rare cases of coercion between string and numerical values.

long long
Can we support long long on systems where long long is larger than what we've been using for IV? What if you can't sprintf a long long?

Improve makedepend
The current makedepend process is clunky and annoyingly slow, but it works for most folks. Alas, it assumes that there is a filename $firstmakefile that the make command will try to use before it uses Makefile . Such may not be the case for all make commands, particularly those on non-Unix systems.

Probably some variant of the BSD .depend file will be useful. We ought to check how other packages do this, if they do it at all. We could probably pre-generate the dependencies (with the exception of malloc.o, which could probably be determined at Makefile.SH extraction time.

GNU Makefile standard targets
GNU software generally has standardized Makefile targets. Unless we have good reason to do otherwise, I see no reason not to support them.

File locking
Somehow, straighten out, document, and implement lockf(), flock(), and/or fcntl() file locking. It's a mess.


Andy Dougherty .

All opinions expressed herein are my own.


$Id: pumpkin.pod,v 1.7 1996/10/22 14:47:36 doughera Released $