NAME WiringPi::API - Direct access to Raspberry Pi's wiringPi API, with optional Perl OO access SYNOPSIS No matter which import option you choose, before you can start making calls, you must initialize the software by calling one of the `setup*()' routines. # import the API functions directly use WiringPi::API qw(:wiringPi) # import the Perl wrapped functions use WiringPi::API qw(:perl) # import both versions use WiringPi::API qw(:all) # use as a base class with OO functionality use parent 'WiringPi::API'; # use in the traditional Perl OO way use WiringPi::API; my $api = WiringPi::API->new; DESCRIPTION This is an XS-based module, and requires wiringPi version 2.36+ to be installed. The `wiringPiDev' shared library is also required (for the LCD functionality), but it's installed by default with `wiringPi'. This module allows you to import the wiringPi's functions directly as-is, use it as a Perl base class, export the Perl wrapped functions, or use it in a traditional Perl OO way. See the documentation on the wiringPi website for a more in-depth description of most of the functions it provides. Some of the functions we've wrapped are not documented, they were just selectively plucked from the C code itself. EXPORT_OK Exported with the `:wiringPi' tag. These XS functions map directly to the wiringPi functions with their original names. Note that `setInterrupt' is not a direct wrapper, it's a custom C wrapper for `wiringPiISR()' in order to make it functional here. wiringPiSetup wiringPiSetupSys wiringPiSetupGpio wiringPiSetupPhys pinMode pullUpDnControl digitalRead digitalWrite digitalWriteByte pwmWrite getAlt piBoardDev wpiToGpio physPinToGpio pwmSetRange lcdInit lcdHome lcdClear lcdDisplay lcdCursor lcdCursorBlink lcdSendCommand lcdPosition lcdCharDef lcdPutChar lcdPuts setInterrupt softPwmCreate softPwmWrite softPwmStop sr595Setup bmp180Setup bmp180Pressure bmp180Temp analogRead analogWrite Exported with the `:perl' tag. Perl wrapper functions for the XS functions. Not all of these are direct wrappers; several have additional/modified functionality than the wrapped versions, but are still 100% compatible. setup setup_sys setup_phys setup_gpio pull_up_down read_pin write_pin pwm_write get_alt gpio_layout wpi_to_gpio phys_to_gpio pwm_set_range lcd_init lcd_home lcd_clear lcd_display lcd_cursor lcd_cursor_blink lcd_send_cmd lcd_position lcd_char_def lcd_put_char lcd_puts set_interrupt soft_pwm_create soft_pwm_write soft_pwm_stop shift_reg_setup pin_mode analog_read analog_write bmp180_setup bmp180_pressure bmp180_temp EXPORT_TAGS :wiringPi See EXPORT_OK :perl See EXPORT_OK :all Exports all available exportable functions. FUNCTION TOC CORE See CORE FUNCTIONS. BOARD See BOARD FUNCTIONS. LCD See LCD FUNCTIONS. SOFTWARE PWM See SOFT PWM FUNCTIONS. INTERRUPT See INTERRUPT FUNCTIONS. ANALOG TO DIGITAL CONVERTER See ADC FUNCTIONS. SHIFT REGISTER See SHIFT REGISTER FUNCTIONS. BAROMETRIC SENSOR See BMP180 PRESSURE SENSOR FUNCTIONS. CORE FUNCTIONS new() NOTE: After an object is created, one of the `setup*' methods must be called to initialize the Pi board. Returns a new `WiringPi::API' object. setup() Maps to `int wiringPiSetup()' Sets the pin number mapping scheme to `wiringPi'. See pinout.xyz for a pin number conversion chart, or on the command line, run `gpio readall'. Note that only one of the `setup*()' methods should be called per program run. setup_gpio() Maps to `int wiringPiSetupGpio()' Sets the pin numbering scheme to `GPIO'. Personally, this is the setup routine that I always use, due to the GPIO numbers physically printed right on the Pi board. setup_phys() Maps to `int wiringPiSetupPhys()' Sets the pin mapping to use the physical pin position number on the board. setup_sys() Maps to `int wiringPiSetupSys()' DEPRECATED. This function is here for legacy purposes only, to provide non-root user access to the GPIO. It required exporting the pins manually before use. wiringPi now uses `/dev/gpiomem' by default, which does not require root level access. Sets the pin numbering scheme to `GPIO'. pin_mode($pin, $mode) Maps to `void pinMode(int pin, int mode)' Puts the pin in either INPUT or OUTPUT mode. Parameters: $pin Mandatory: The pin number, in the pin numbering scheme dictated by whichever `setup*()' routine you used. $mode Mandatory: `0' for INPUT, `1' OUTPUT, `2' PWM_OUTPUT and `3' GPIO_CLOCK. read_pin($pin); Maps to `int digitalRead(int pin)' Returns the current state (HIGH/on, LOW/off) of a given pin. Parameters: $pin Mandatory: The pin number, in the pin numbering scheme dictated by whichever `setup*()' routine you used. write_pin($pin, $state) Maps to `void digitalWrite(int pin, int state)' Sets the state (HIGH/on, LOW/off) of a given pin. Parameters: $pin Mandatory: The pin number, in the pin numbering scheme dictated by whichever `setup*()' routine you used. $state Mandatory: `1' to turn the pin on (HIGH), and `0' to turn it LOW (off). analog_read($pin); Maps to `int analogRead(int pin)' Returns the data for an analog pin. Note that the Raspberry Pi doesn't have analog pins, so this is used when connected through an ADC or to pseudo analog pins. Parameters: $pin Mandatory: The pseudo pin number, in the pin numbering scheme dictated by whichever `setup*()' routine you used. analog_write($pin, $value) Maps to `void analogWrite(int pin, int value)' Writes the value to the corresponding analog pseudo pin. Parameters: $pin Mandatory: The pseudo pin number, in the pin numbering scheme dictated by whichever `setup*()' routine you used. $value Mandatory: The data which you want to write to the pseudo pin. pull_up_down($pin, $direction) Maps to `void pullUpDnControl(int pin, int pud)' Enable/disable the built-in pull up/down resistors for a specified pin. Parameters: $pin Mandatory: The pin number, in the pin numbering scheme dictated by whichever `setup*()' routine you used. $direction Mandatory: `2' for UP, `1' for DOWN and `0' to disable the resistor. pwm_write($pin, $value) Maps to `void pwmWrite(int pin, int value)' Sets the Pulse Width Modulation duty cycle (on-time) of the pin. Parameters: $pin Mandatory: The pin number, in the pin numbering scheme dictated by whichever `setup*()' routine you used. $value Mandatory: `0' to `1023'. `0' is 0% (off) and `1023' is 100% (fully on). get_alt($pin) Maps to `int getAlt(int pin)' This returns the current mode of the pin (using `getAlt()' C call). Modes are INPUT `0', OUTPUT `1', PWM `2' and CLOCK `3'. Parameters: $pin Mandatory: The pin number, in the pin numbering scheme dictated by whichever `setup*()' routine you used. BOARD FUNCTIONS gpio_layout() Maps to `int piGpioLayout()' Returns the Raspberry Pi board's GPIO layout (ie. the board revision). wpi_to_gpio($pin_num) Maps to `int wpiPinToGpio(int pin)' Converts a `wiringPi' pin number to the Broadcom (BCM) representation, and returns it. Parameters: $pin_num Mandatory: The pin number, in the pin numbering scheme dictated by whichever `setup*()' routine you used. phys_to_gpio($pin_num) Maps to `int physPinToGpio(int pin)' Converts the pin number on the physical board to the `GPIO' representation, and returns it. Parameters: $pin_num Mandatory: The pin number on the physical Raspberry Pi board. phys_to_wpi($pin_num) Maps to `int physPinToWpi(int pin)' Converts the pin number on the physical board to the `wiringPi' numbering representation, and returns it. Parameters: $pin_num Mandatory: The pin number on the physical Raspberry Pi board. pwm_set_range($range); Maps to `void pwmSetRange(int range)' Sets the range register of the Pulse Width Modulation (PWM) functionality. It defaults to `1024' (`0-1023'). Parameters: $range Mandatory: An integer between `0' and `1023'. LCD FUNCTIONS There are several methods to drive standard Liquid Crystal Displays. See wiringPiDev LCD page for full details. lcd_init(%args) Maps to: int lcdInit( rows, cols, bits, rs, strb, d0, d1, d2, d3, d4, d5, d6, d7 ); Initializes the LCD library, and returns an integer representing the handle handle (file descriptor) of the device. The return is supposed to be constant, so DON'T change it. Parameters: %args = ( rows => $num, # number of rows. eg: 2 or 4 cols => $num, # number of columns. eg: 16 or 20 bits => 4|8, # width of the interface (4 or 8) rs => $pin_num, # pin number of the LCD's RS pin strb => $pin_num, # pin number of the LCD's strobe (E) pin d0 => $pin_num, # pin number for LCD data pin 1 ... d7 => $pin_num, # pin number for LCD data pin 8 ); Mandatory: All entries must have a value. If you're only using four (4) bit width, `d4' through `d7' must be set to `0'. Note: When in 4-bit mode, the `d0' through `3' parameters actually map to pins `d4' through `d7' on the LCD board, so you need to connect those pins to their respective selected GPIO pins. lcd_home($fd) Maps to `void lcdHome(int fd)' Moves the LCD cursor to the home position (top row, leftmost column). Parameters: $fd Mandatory: The file descriptor integer returned by `lcd_init()'. lcd_clear($fd) Maps to `void lcdClear(int fd)' Clears the LCD display. Parameters: $fd Mandatory: The file descriptor integer returned by `lcd_init()'. lcd_display($fd, $state) Maps to `void lcdDisplay(int fd, int state)' Turns the LCD display on and off. Parameters: $fd Mandatory: The file descriptor integer returned by `lcd_init()'. $state Mandatory: `0' to turn the display off, and `1' for on. lcd_cursor($fd, $state) Maps to `void lcdCursor(int fd, int state)' Turns the LCD cursor on and off. Parameters: $fd Mandatory: The file descriptor integer returned by `lcd_init()'. $state Mandatory: `0' to turn the cursor off, `1' for on. lcd_cursor_blink($fd, $state) Maps to `void lcdCursorBlink(int fd, int state)' Allows you to enable/disable a blinking cursor. Parameters: $fd Mandatory: The file descriptor integer returned by `lcd_init()'. lcd_send_cmd($fd, $command) Maps to `void lcdSendCommand(int fd, char command)' Sends any arbitrary command to the LCD. Parameters: $fd Mandatory: The file descriptor integer returned by `lcd_init()'. $command Mandatory: A command to submit to the LCD. lcd_position($fd, $x, $y) Maps to `void lcdPosition(int fd, int x, int y)' Moves the cursor to the specified position on the LCD display. Parameters: $fd Mandatory: The file descriptor integer returned by `lcd_init()'. $x Mandatory: Column position. `0' is the left-most edge. $y Mandatory: Row position. `0' is the top row. lcd_char_def($fd, $index, $data) Maps to `void lcdCharDef(int fd, unsigned char data [8])' This allows you to re-define one of the 8 user-definable characters in the display. The data array is 8 bytes which represent the character from the top-line to the bottom line. Note that the characters are actually 5×8, so only the lower 5 bits are used. The index is from 0 to 7 and you can subsequently print the character defined using the lcdPutchar() call. Parameters: $fd Mandatory: The file descriptor integer returned by `lcd_init()'. $index Mandatory: Index of the display character. Values are `0-7'. $data Mandatory: See above description. lcd_put_char($fd, $char) Maps to `void lcdPutChar(int fd, unsigned char data)' Writes a single ASCII character to the LCD display, at the current cursor position. Parameters: $fd Mandatory: The file descriptor integer returned by `lcd_init()'. $char Mandatory: A single ASCII character. lcd_puts($fd, $string) Maps to `void lcdPuts(int fd, char *string)' Writes a string to the LCD display, at the current cursor position. Parameters: $fd Mandatory: The file descriptor integer returned by `lcd_init()'. $string Mandatory: A string to display. SOFT PWM FUNCTIONS Software Pulse Width Modulation is not the same as hardware PWM. It should not be used for critical things as it's frequency isn't 100% stable. This software PWM allows you to use PWM on ANY GPIO pin, not just the single hardware pin available. soft_pwm_create($pin, $initial_value, $range) Creates a new software PWM thread that runs outside of your main application. Parameters: $pin Mandatory: The pin number, in the pin numbering scheme dictated by whichever `setup*()' routine you used. $initial_value Optional: A value between `0' and `$range'. $range Optional: Look at this like a dial. We start at `0' and the dial has turned completely when we hit the `$range' integer. If not sent in, defaults to `1023'. soft_pwm_write($pin, $value) Sets the `HIGH' frequency on `pin' to whatever is in `$value'. The value must be lower than what was set in the `$range' parameter to `soft_pwm_create()'. soft_pwm_stop($pin) Turns off software PWM on the `$pin'. INTERRUPT FUNCTIONS set_interrupt($pin, $edge, $callback) IMPORTANT: The interrupt functionality requires that your Perl can be used in pthreads. If you do not have a threaded Perl, the program will cause a segmentation fault. Wrapper around wiringPi's `wiringPiISR()' that allows you to send in the name of a Perl sub in your own code that will be called if an interrupt is triggered. Parameters: $pin Mandatory: The pin number, in the pin numbering scheme dictated by whichever `setup*()' routine you used. $edge Mandatory: `1' (lowering), `2' (raising) or `3' (both). $callback Mandatory: The string name of a subroutine previously written in your user code that will be called when the interrupt is triggered. This is your interrupt handler. ADC FUNCTIONS Analog to digital converters (ADC) allow you to read analog data on the Raspberry Pi, as the Pi doesn't have any analog input pins. This section is broken down by type/model. ADS1115 MODEL ads1115Setup($pin_base, $addr) The ADS1115 is a four channel, 16-bit wide ADC. Parameters: $pin_base Mandatory: Signed integer, higher than that of all GPIO pins. This is the base number we'll use to access the pseudo pins on the ADC. Example: If `400' is sent in, ADC pin `A0' (or `0') will be pin 400, and `AD3' (the fourth analog pin) will be 403. Parameters: $addr Mandatory: Signed integer. This parameter depends on how you have the `ADDR' pin on the ADC connected to the Pi. Below is a chart showing if the `ADDR' pin is connected to the Pi `Pin', you'll get the address. You can also use `i2cdetect -y 1' to find out your ADC address. Pin Address --------------- Gnd 0x48 VDD 0x49 SDA 0x4A SCL 0x4B SHIFT REGISTER FUNCTIONS Shift registers allow you to add extra output pins by multiplexing a small number of GPIO. Currently, we support the SR74HC595 unit, which provides eight outputs by using only three GPIO. To further, this particular unit can be daisy chained up to four wide to provide an additional 32 outputs using the same three GPIO pins. shift_reg_setup This function configures the Raspberry Pi to use a shift register (The SR74HC595 is currently supported). Parameters: $pin_base Mandatory: Signed integer, higher than that of all existing GPIO pins. This parameter registers pin 0 on the shift register to an internal GPIO pin number. For example, setting this to 100, you will be able to access the first output on the register as GPIO 100 in all other functions. $num_pins Mandatory: Signed integer, the number of outputs on the shift register. For a single SR74HC595, this is eight. If you were to daisy chain two together, this parameter would be 16. $data_pin Mandatory: Integer, the GPIO pin number connected to the register's `DS' pin (14). Can be any GPIO pin capable of output. $clock_pin Mandatory: Integer, the GPIO pin number connected to the register's `SHCP' pin (11). Can be any GPIO pin capable of output. $latch_pin Mandatory: Integer, the GPIO pin number connected to the register's `STCP' pin (12). Can be any GPIO pin capable of output. BMP180 PRESSURE SENSOR FUNCTIONS These functions configure and fetch data from the BMP180 pressure sensor. bmp180_setup($pin_base) Configures the system to read from a BMP180 pressure sensor. These functions can not return the raw values from the sensor. See each function documentation to learn how to do so. Parameters: $pin_base Mandatory: Integer, the number at which to place the pseudo analog pins in the GPIO stack. For example, if you use `200', pin `200' represents the temperature feature of the sensor, and `201' represents the pressure feature. Return: undef. bmp180_temp($pin, $want) Returns the temperature from the sensor. Parameters: $pin Mandatory: Integer, represents the `$pin_base' used in the setup function `+ 0'. $want Optional: `'c'' for Celcius, and `'f'' for Farenheit. Defaults to `'f''. Return: A floating point number in the requested conversion. NOTE: To get the raw sensor temperature, call the C function `bmp180Temp($pin)' directly. bmp180_pressure($pin) Returns the current air pressure in kPa. Parameters: $pin Mandatory: Integer, represents the `$pin_base' used in the setup function `+ 1'. Return: A floating point number that represents the air pressure in kPa. NOTE: To get the raw sensor pressure, call the C function `bmp180Pressure($pin)' directly. DEVELOPER FUNCTIONS These functions are under testing, or don't potentially have a use to the end user. They may be risky to use, so use at your own risk. The functions in this section do not have a Perl wrapper equivalent. pseudoPinsSetup(int pinBase) This function allocates shared memory for the pseudo pins used to communicate with devices that are beyond the reach of the Pi's GPIO (eg: shift registers, ADCs etc). Parameters: pinBase Mandatory: Integer, larger than the highest GPIO pin number. Eg: `500' will be the base for the analog pins on an ADS1115 ADC. Pin `A0' would be `500', and ADC pin `A3' would be `503'. pinModeAlt(int pin, int mode) Undocumented function that allows any pin to be set to any mode. Parameters: pin Mandatory: Signed integer, any valid GPIO pin number. mode Mandatory: Signed integer, any valid wiringPi pin mode. digitalWriteByte(const int value) Writes an 8-bit byte to the first eight GPIO pins. Parameters: value Mandatory: Unsigned int, the byte value you want to send in. Return: void digitalWriteByte2(const int value) Same as digitalWriteByte(const int value), but writes to the second group of eight GPIO pins. digitalReadByte() Reads an 8-bit byte from the first eight GPIO pins on the Pi. Takes no parameters, returns the byte value as an unsigned int. digitalReadByte2() Same as digitalReadByte, but reads from the second group of eight GPIO pins. head1 AUTHOR Steve Bertrand, COPYRIGHT AND LICENSE Copyright (C) 2016 by Steve Bertrand This library is free software; you can redistribute it and/or modify it under the same terms as Perl itself, either Perl version 5.18.2 or, at your option, any later version of Perl 5 you may have available.