NAME Coro - the only real threads in perl SYNOPSIS use Coro; async { # some asynchronous thread of execution print "2\n"; cede; # yield back to main print "4\n"; }; print "1\n"; cede; # yield to coroutine print "3\n"; cede; # and again # use locking use Coro::Semaphore; my $lock = new Coro::Semaphore; my $locked; $lock->down; $locked = 1; $lock->up; DESCRIPTION For a tutorial-style introduction, please read the Coro::Intro manpage. This manpage mainly contains reference information. This module collection manages continuations in general, most often in the form of cooperative threads (also called coroutines in the documentation). They are similar to kernel threads but don't (in general) run in parallel at the same time even on SMP machines. The specific flavor of thread offered by this module also guarantees you that it will not switch between threads unless necessary, at easily-identified points in your program, so locking and parallel access are rarely an issue, making thread programming much safer and easier than using other thread models. Unlike the so-called "Perl threads" (which are not actually real threads but only the windows process emulation ported to unix), Coro provides a full shared address space, which makes communication between threads very easy. And threads are fast, too: disabling the Windows process emulation code in your perl and using Coro can easily result in a two to four times speed increase for your programs. Coro achieves that by supporting multiple running interpreters that share data, which is especially useful to code pseudo-parallel processes and for event-based programming, such as multiple HTTP-GET requests running concurrently. See Coro::AnyEvent to learn more on how to integrate Coro into an event-based environment. In this module, a thread is defined as "callchain + lexical variables + @_ + $_ + $@ + $/ + C stack), that is, a thread has its own callchain, its own set of lexicals and its own set of perls most important global variables (see Coro::State for more configuration and background info). See also the "SEE ALSO" section at the end of this document - the Coro module family is quite large. GLOBAL VARIABLES $Coro::main This variable stores the coroutine object that represents the main program. While you cna "ready" it and do most other things you can do to coroutines, it is mainly useful to compare again $Coro::current, to see whether you are running in the main program or not. $Coro::current The coroutine object representing the current coroutine (the last coroutine that the Coro scheduler switched to). The initial value is $Coro::main (of course). This variable is strictly *read-only*. You can take copies of the value stored in it and use it as any other coroutine object, but you must not otherwise modify the variable itself. $Coro::idle This variable is mainly useful to integrate Coro into event loops. It is usually better to rely on Coro::AnyEvent or Coro::EV, as this is pretty low-level functionality. This variable stores either a coroutine or a callback. If it is a callback, the it is called whenever the scheduler finds no ready coroutines to run. The default implementation prints "FATAL: deadlock detected" and exits, because the program has no other way to continue. If it is a coroutine object, then this object will be readied (without invoking any ready hooks, however) when the scheduler finds no other ready coroutines to run. This hook is overwritten by modules such as "Coro::EV" and "Coro::AnyEvent" to wait on an external event that hopefully wake up a coroutine so the scheduler can run it. Note that the callback *must not*, under any circumstances, block the current coroutine. Normally, this is achieved by having an "idle coroutine" that calls the event loop and then blocks again, and then readying that coroutine in the idle handler, or by simply placing the idle coroutine in this variable. See Coro::Event or Coro::AnyEvent for examples of using this technique. Please note that if your callback recursively invokes perl (e.g. for event handlers), then it must be prepared to be called recursively itself. SIMPLE COROUTINE CREATION async { ... } [@args...] Create a new coroutine and return its coroutine object (usually unused). The coroutine will be put into the ready queue, so it will start running automatically on the next scheduler run. The first argument is a codeblock/closure that should be executed in the coroutine. When it returns argument returns the coroutine is automatically terminated. The remaining arguments are passed as arguments to the closure. See the "Coro::State::new" constructor for info about the coroutine environment in which coroutines are executed. Calling "exit" in a coroutine will do the same as calling exit outside the coroutine. Likewise, when the coroutine dies, the program will exit, just as it would in the main program. If you do not want that, you can provide a default "die" handler, or simply avoid dieing (by use of "eval"). Example: Create a new coroutine that just prints its arguments. async { print "@_\n"; } 1,2,3,4; async_pool { ... } [@args...] Similar to "async", but uses a coroutine pool, so you should not call terminate or join on it (although you are allowed to), and you get a coroutine that might have executed other code already (which can be good or bad :). On the plus side, this function is about twice as fast as creating (and destroying) a completely new coroutine, so if you need a lot of generic coroutines in quick successsion, use "async_pool", not "async". The code block is executed in an "eval" context and a warning will be issued in case of an exception instead of terminating the program, as "async" does. As the coroutine is being reused, stuff like "on_destroy" will not work in the expected way, unless you call terminate or cancel, which somehow defeats the purpose of pooling (but is fine in the exceptional case). The priority will be reset to 0 after each run, tracing will be disabled, the description will be reset and the default output filehandle gets restored, so you can change all these. Otherwise the coroutine will be re-used "as-is": most notably if you change other per-coroutine global stuff such as $/ you *must needs* revert that change, which is most simply done by using local as in: "local $/". The idle pool size is limited to 8 idle coroutines (this can be adjusted by changing $Coro::POOL_SIZE), but there can be as many non-idle coros as required. If you are concerned about pooled coroutines growing a lot because a single "async_pool" used a lot of stackspace you can e.g. "async_pool { terminate }" once per second or so to slowly replenish the pool. In addition to that, when the stacks used by a handler grows larger than 32kb (adjustable via $Coro::POOL_RSS) it will also be destroyed. STATIC METHODS Static methods are actually functions that implicitly operate on the current coroutine. schedule Calls the scheduler. The scheduler will find the next coroutine that is to be run from the ready queue and switches to it. The next coroutine to be run is simply the one with the highest priority that is longest in its ready queue. If there is no coroutine ready, it will clal the $Coro::idle hook. Please note that the current coroutine will *not* be put into the ready queue, so calling this function usually means you will never be called again unless something else (e.g. an event handler) calls "->ready", thus waking you up. This makes "schedule" *the* generic method to use to block the current coroutine and wait for events: first you remember the current coroutine in a variable, then arrange for some callback of yours to call "->ready" on that once some event happens, and last you call "schedule" to put yourself to sleep. Note that a lot of things can wake your coroutine up, so you need to check whether the event indeed happened, e.g. by storing the status in a variable. See HOW TO WAIT FOR A CALLBACK, below, for some ways to wait for callbacks. cede "Cede" to other coroutines. This function puts the current coroutine into the ready queue and calls "schedule", which has the effect of giving up the current "timeslice" to other coroutines of the same or higher priority. Once your coroutine gets its turn again it will automatically be resumed. This function is often called "yield" in other languages. Coro::cede_notself Works like cede, but is not exported by default and will cede to *any* coroutine, regardless of priority. This is useful sometimes to ensure progress is made. terminate [arg...] Terminates the current coroutine with the given status values (see cancel). killall Kills/terminates/cancels all coroutines except the currently running one. This is useful after a fork, either in the child or the parent, as usually only one of them should inherit the running coroutines. Note that while this will try to free some of the main programs resources, you cannot free all of them, so if a coroutine that is not the main program calls this function, there will be some one-time resource leak. COROUTINE OBJECT METHODS These are the methods you can call on coroutine objects (or to create them). new Coro \&sub [, @args...] Create a new coroutine and return it. When the sub returns, the coroutine automatically terminates as if "terminate" with the returned values were called. To make the coroutine run you must first put it into the ready queue by calling the ready method. See "async" and "Coro::State::new" for additional info about the coroutine environment. $success = $coroutine->ready Put the given coroutine into the end of its ready queue (there is one queue for each priority) and return true. If the coroutine is already in the ready queue, do nothing and return false. This ensures that the scheduler will resume this coroutine automatically once all the coroutines of higher priority and all coroutines of the same priority that were put into the ready queue earlier have been resumed. $is_ready = $coroutine->is_ready Return whether the coroutine is currently the ready queue or not, $coroutine->cancel (arg...) Terminates the given coroutine and makes it return the given arguments as status (default: the empty list). Never returns if the coroutine is the current coroutine. $coroutine->schedule_to Puts the current coroutine to sleep (like "Coro::schedule"), but instead of continuing with the next coro from the ready queue, always switch to the given coroutine object (regardless of priority etc.). The readyness state of that coroutine isn't changed. This is an advanced method for special cases - I'd love to hear about any uses for this one. $coroutine->cede_to Like "schedule_to", but puts the current coroutine into the ready queue. This has the effect of temporarily switching to the given coroutine, and continuing some time later. This is an advanced method for special cases - I'd love to hear about any uses for this one. $coroutine->throw ([$scalar]) If $throw is specified and defined, it will be thrown as an exception inside the coroutine at the next convenient point in time. Otherwise clears the exception object. Coro will check for the exception each time a schedule-like-function returns, i.e. after each "schedule", "cede", "Coro::Semaphore->down", "Coro::Handle->readable" and so on. Most of these functions detect this case and return early in case an exception is pending. The exception object will be thrown "as is" with the specified scalar in $@, i.e. if it is a string, no line number or newline will be appended (unlike with "die"). This can be used as a softer means than "cancel" to ask a coroutine to end itself, although there is no guarantee that the exception will lead to termination, and if the exception isn't caught it might well end the whole program. You might also think of "throw" as being the moral equivalent of "kill"ing a coroutine with a signal (in this case, a scalar). $coroutine->join Wait until the coroutine terminates and return any values given to the "terminate" or "cancel" functions. "join" can be called concurrently from multiple coroutines, and all will be resumed and given the status return once the $coroutine terminates. $coroutine->on_destroy (\&cb) Registers a callback that is called when this coroutine gets destroyed, but before it is joined. The callback gets passed the terminate arguments, if any, and *must not* die, under any circumstances. $oldprio = $coroutine->prio ($newprio) Sets (or gets, if the argument is missing) the priority of the coroutine. Higher priority coroutines get run before lower priority coroutines. Priorities are small signed integers (currently -4 .. +3), that you can refer to using PRIO_xxx constants (use the import tag :prio to get then): PRIO_MAX > PRIO_HIGH > PRIO_NORMAL > PRIO_LOW > PRIO_IDLE > PRIO_MIN 3 > 1 > 0 > -1 > -3 > -4 # set priority to HIGH current->prio(PRIO_HIGH); The idle coroutine ($Coro::idle) always has a lower priority than any existing coroutine. Changing the priority of the current coroutine will take effect immediately, but changing the priority of coroutines in the ready queue (but not running) will only take effect after the next schedule (of that coroutine). This is a bug that will be fixed in some future version. $newprio = $coroutine->nice ($change) Similar to "prio", but subtract the given value from the priority (i.e. higher values mean lower priority, just as in unix). $olddesc = $coroutine->desc ($newdesc) Sets (or gets in case the argument is missing) the description for this coroutine. This is just a free-form string you can associate with a coroutine. This method simply sets the "$coroutine->{desc}" member to the given string. You can modify this member directly if you wish. GLOBAL FUNCTIONS Coro::nready Returns the number of coroutines that are currently in the ready state, i.e. that can be switched to by calling "schedule" directory or indirectly. The value 0 means that the only runnable coroutine is the currently running one, so "cede" would have no effect, and "schedule" would cause a deadlock unless there is an idle handler that wakes up some coroutines. my $guard = Coro::guard { ... } This creates and returns a guard object. Nothing happens until the object gets destroyed, in which case the codeblock given as argument will be executed. This is useful to free locks or other resources in case of a runtime error or when the coroutine gets canceled, as in both cases the guard block will be executed. The guard object supports only one method, "->cancel", which will keep the codeblock from being executed. Example: set some flag and clear it again when the coroutine gets canceled or the function returns: sub do_something { my $guard = Coro::guard { $busy = 0 }; $busy = 1; # do something that requires $busy to be true } unblock_sub { ... } This utility function takes a BLOCK or code reference and "unblocks" it, returning a new coderef. Unblocking means that calling the new coderef will return immediately without blocking, returning nothing, while the original code ref will be called (with parameters) from within another coroutine. The reason this function exists is that many event libraries (such as the venerable Event module) are not coroutine-safe (a weaker form of reentrancy). This means you must not block within event callbacks, otherwise you might suffer from crashes or worse. The only event library currently known that is safe to use without "unblock_sub" is EV. This function allows your callbacks to block by executing them in another coroutine where it is safe to block. One example where blocking is handy is when you use the Coro::AIO functions to save results to disk, for example. In short: simply use "unblock_sub { ... }" instead of "sub { ... }" when creating event callbacks that want to block. If your handler does not plan to block (e.g. simply sends a message to another coroutine, or puts some other coroutine into the ready queue), there is no reason to use "unblock_sub". Note that you also need to use "unblock_sub" for any other callbacks that are indirectly executed by any C-based event loop. For example, when you use a module that uses AnyEvent (and you use Coro::AnyEvent) and it provides callbacks that are the result of some event callback, then you must not block either, or use "unblock_sub". $cb = Coro::rouse_cb Create and return a "rouse callback". That's a code reference that, when called, will remember a copy of its arguments and notify the owner coroutine of the callback. See the next function. @args = Coro::rouse_wait [$cb] Wait for the specified rouse callback (or the last one that was created in this coroutine). As soon as the callback is invoked (or when the callback was invoked before "rouse_wait"), it will return the arguments originally passed to the rouse callback. See the section HOW TO WAIT FOR A CALLBACK for an actual usage example. HOW TO WAIT FOR A CALLBACK It is very common for a coroutine to wait for some callback to be called. This occurs naturally when you use coroutines in an otherwise event-based program, or when you use event-based libraries. These typically register a callback for some event, and call that callback when the event occured. In a coroutine, however, you typically want to just wait for the event, simplyifying things. For example "AnyEvent->child" registers a callback to be called when a specific child has exited: my $child_watcher = AnyEvent->child (pid => $pid, cb => sub { ... }); But from withina coroutine, you often just want to write this: my $status = wait_for_child $pid; Coro offers two functions specifically designed to make this easy, "Coro::rouse_cb" and "Coro::rouse_wait". The first function, "rouse_cb", generates and returns a callback that, when invoked, will save its arguments and notify the coroutine that created the callback. The second function, "rouse_wait", waits for the callback to be called (by calling "schedule" to go to sleep) and returns the arguments originally passed to the callback. Using these functions, it becomes easy to write the "wait_for_child" function mentioned above: sub wait_for_child($) { my ($pid) = @_; my $watcher = AnyEvent->child (pid => $pid, cb => Coro::rouse_cb); my ($rpid, $rstatus) = Coro::rouse_wait; $rstatus } In the case where "rouse_cb" and "rouse_wait" are not flexible enough, you can roll your own, using "schedule": sub wait_for_child($) { my ($pid) = @_; # store the current coroutine in $current, # and provide result variables for the closure passed to ->child my $current = $Coro::current; my ($done, $rstatus); # pass a closure to ->child my $watcher = AnyEvent->child (pid => $pid, cb => sub { $rstatus = $_[1]; # remember rstatus $done = 1; # mark $rstatus as valud }); # wait until the closure has been called schedule while !$done; $rstatus } BUGS/LIMITATIONS fork with pthread backend When Coro is compiled using the pthread backend (which isn't recommended but required on many BSDs as their libcs are completely broken), then coroutines will not survive a fork. There is no known workaround except to fix your libc and use a saner backend. perl process emulation ("threads") This module is not perl-pseudo-thread-safe. You should only ever use this module from the first thread (this requirement might be removed in the future to allow per-thread schedulers, but Coro::State does not yet allow this). I recommend disabling thread support and using processes, as having the windows process emulation enabled under unix roughly halves perl performance, even when not used. coroutine switching not signal safe You must not switch to another coroutine from within a signal handler (only relevant with %SIG - most event libraries provide safe signals). That means you *MUST NOT* call any function that might "block" the current coroutine - "cede", "schedule" "Coro::Semaphore->down" or anything that calls those. Everything else, including calling "ready", works. SEE ALSO Event-Loop integration: Coro::AnyEvent, Coro::EV, Coro::Event. Debugging: Coro::Debug. Support/Utility: Coro::Specific, Coro::Util. Locking and IPC: Coro::Signal, Coro::Channel, Coro::Semaphore, Coro::SemaphoreSet, Coro::RWLock. I/O and Timers: Coro::Timer, Coro::Handle, Coro::Socket, Coro::AIO. Compatibility with other modules: Coro::LWP (but see also AnyEvent::HTTP for a better-working alternative), Coro::BDB, Coro::Storable, Coro::Select. XS API: Coro::MakeMaker. Low level Configuration, Thread Environment, Continuations: Coro::State. AUTHOR Marc Lehmann http://home.schmorp.de/